Description

Introduction

CRA-300 Airway Buffing Wheel Forming Machine is used to form the small airway buffing polishing wheel,wood banding wheel. Available for materials of soft or harden treated fabric, sisal etc. Before using this machine, you should prepare bias fabric or sisal, and iron claw or plate according your favor.  Bias fabric making you can use our CRA-500 Bias Fabric Cutting And Rolling Machine For Airway Buffing Wheel

And to make a ready wheel, after this forming machine, two more processes should be done-Pressing and cutting.

Pressing you can use our CRA-600 Buffing Wheel Pressing Machine and

Edge cutting use CRA-700 Knife Belt Buffing Wheel Edge Cutting Machine.

Advantage of 300 Ventilated Buffs Forming Machine:

• Available for airway buffs from 100-250 mm diameter.
• Available for materials of soft or harden treated fabric, sisal etc.
• Available for almost all hot sale center,Iron claw 2 inch, 2.5 inch,  or Iron plate with round hole, hexagon hole.
• Each control, full automatic, only need one worker to operate.
• High production rate: Maximum 5000 PCS per day .
• Interface and language in English.
• Offer free training on machine and life time consultant.

Structure

1. hydraulic system                  7. right cylinder
2. left trestle                               8. right Spandex
3. left cylinder                           9. circuit board
4. pressure gage                        10. Turntable right
5. upper Spandex                      11. cutter
6. control panel                         12. Turntable left

Parameter