Button Version Bias Airway Buffs Forming Machine is used to form the airway buffing polishing wheel, also called as Ventilated Sisal Buffs, airflow buffs, bias airway buffs. Available for materials of soft or harden treated fabric, sisal etc. Before using this machine, you should prepare bias fabric or sisal, and iron claw or plate according your favor.
And to make a ready wheel, after this forming machine, two more processes should be done-Pressing and cutting.
Pressing you can use our CRA-600 Buffing Wheel Pressing Machine and
Edge cutting use CRA-700 Knife Belt Buffing Wheel Edge Cutting Machine.
- Available for airway buffs from 200-750 mm diameter.
- Buttons control–easy maintenance,lower cost, faster speed/customized electric system according to local voltage, for example 220V, 3 phases/less static disturbance from cloth materials when working.
- Available for materials of soft or harden treated fabric, sisal etc.
- Available for almost all hot sale center,Iron claw 3 inch, 5 inch, 7 inch, or Iron plate with round hole, hexagon hole.
- Each control, full automatic, only need one worker to operate.
- High production rate: Maximum 5000 PCS per day .
- Interface and language in English.
- Offer free training on machine and life time consultant.
Structure of airway buffs produce machine
- hydraulic system 7. right cylinder
- left trestle 8. right Spandex
- left cylinder 9. circuit board
- pressure gage 10. Turntable right
- upper Spandex 11. cutter
- control panel 12. Turntable left
|Parameter||Button Version Bias Airway Buffs Forming Machine|
|Voltage AC（v）||380V three-phase four-wire（customized)|
|RPM of Batching||Adjustable|
|MAX dia of buff（mm）||750|
|Min dia of buff（mm）||200|