Polishing Wheel Edge Cutting Machine Main details:
Knife belt wheel dia: 490mm
Belt knife left: 3150mm
Belt speed: 49.5mm/min
Process dia: 150-580mm
Process thickness: 80mm
Motor power: 1.5 KW
- Body: made by heavy steel plate, have enough intension and stability, use for fixing the saw and the equipment to tight the saw.
- Belt knife: made by imported materials, length 3150mm
- Knife sharpener: made by 2 motors and adjustment rack, for sharpening the knife
- Knife rest: made by alloy-steel plate, have enough intension and stability, ensure the verticality of cutting face between belt knife and the buff wheel.
- Working bench: use for automatically feeding, adjustment of sizes of the wheel.
- Mechanical transfer arm,
- Pneumatic parts,
- Speed controller,
Operation of Polishing Wheel Edge Cutting Machine:
- Put machine on smooth ground, connect to 380V 3 phases 4 wires power supply, and 0.4 MP air source.
- Press the START button, ensure the knife belt rotate at the clockwise direction.
- Loose the handle screw beside the ruler, by operating the Forward button and Retreat button to adjust size of the buffing wheel, and using Knife Forward button and Knife Retreat button the knife, lock the screws after finishing adjustment.
- Cutting: After putting on the wheel , Press the Press button, machine start the Automatic control system(cylinder press the wheel—cutting—setting the rounds figures—wheel retreat automatically—cylinder goes up—finished cutting)
- Cutting speed setting: You can adjust the rotate speed depend on different materials buffing wheel to achieve the highest efficiency.
- Knife sharpening:
A. Long time sharpening Polishing Wheel Edge Cutting Machine
B. Definite sharpening: set 00002 means after process two buffing wheel, sharpen the knife one time, sharpening time can be set.
Common faults and fix methods：
|buffing wheel and knife seizure||1.knife not sharp||1．Sharpen the knife|
|2．Belt of the motor loose||2．Check and tight the belt of motor
|Belt knife off position
|1．Driving wheel is not parallel||1．Adjust the driving wheel and driven wheel to parallel position|
|2． Screws or nuts are loose||2．Tight the screws or nuts|
|Buffing wheel slips||Air pressure is not enough||Adjust the air pump, general it should be 0.6 Pa|
|Mechanical transfer arm misplace
|Screws and handle of Air pump for the arm||Adjust the screws and handle|
Other process machine for making airway buffing wheel:
Q: How long is your delivery time for CRA-700 Polishing Wheel Edge Cutting Machine?
A: Generally it is 5-15 workdays if the goods are in stock. Or it is 15-60 workdays if the goods are not in stock, it is according to quantity and machine model.
Q: Do you test sample for free ?
A: Yes, we test the sample for free.But you will offer the freight and specific materials.
Q: What is your terms of payment ?
A: Payment<=10000USD, 100% in advance. Payment>=10000USD, 30% T/T in advance ,balance before shipment.
Q: What is your after-sales service?
A: * Training how to install the machine.
* Training how to use the machine.
* Life time free consultant.
Q:What is your Pre-sales service ?
A: * Inquiry and consulting support.
* Sample testing support.
* Technology solution and quotation
* Customer visit our Factory and check our production.
Q:How long time of your after-sale feedback ?
A: Within 0-24 hours.